Intellica delivers end-to-end wireless performance validation for any connected device — IoT, ISP gateways, FWA routers, mobile, and enterprise equipment. TR-398 compliance, precision site surveys, customer-specific test scenarios, and 24/7 automated monitoring across 5 real-world Pacific Northwest test environments.
TR-398 Broadband StandardWi-Fi 4/5/6/6E/7IoT Device TestingISP Gateway ValidationMobile Testing200+ Real ClientsFaraday Room1000+ MetricsHistorical Real-Time DataAll Property TypesRural & DowntownVirtual Tour Coming SoonAPI / USP / ACS TestingRDK-B Dev AnalysisLong-Term Endless TestingWi-Fi Site SurveyWireless Installation Advice4000+ sq ft Survey CoverageIntellica MonitoringMesh & RDK-BTR-398 Broadband StandardWi-Fi 4/5/6/6E/7IoT Device TestingISP Gateway ValidationMobile Testing200+ Real ClientsFaraday Room1000+ MetricsHistorical Real-Time DataAll Property TypesRural & DowntownVirtual Tour Coming SoonAPI / USP / ACS TestingRDK-B Dev AnalysisLong-Term Endless TestingWi-Fi Site SurveyWireless Installation Advice4000+ sq ft Survey CoverageIntellica MonitoringMesh & RDK-B
⚠️ Why wireless testing matters
When Wi-Fi Fails Live, Everyone Watches.
Untested devices fail in the most visible moments. A dropped signal during a live product demo, a frozen gateway during a keynote, a router that can't handle real-world IoT load — these aren't edge cases. They're the cost of skipping proper wireless validation.
Intellica exists to find every failure before it reaches a customer, a stage, or a headline.
21B+
Wi-Fi devices in active use globally in 2024 — Wi-Fi Alliance
18%
of US consumers switched ISP in the last 12 months due to quality issues — Airties/Qualtrics
■ LIVE TELEMETRY
BAND5 GHz
CHANNELCH 36
WIDTH80 MHz
RSSI-52 dBm
SNR38 dB
PHY RATE1201 Mbps
CLIENTS47 / 200
TX RETRY0.3%
STATUSPASS
THROUGHPUT
892 Mbps
SIGNAL QUALITY
91%
SIGNAL NOMINAL — ALL BANDS ACTIVE
$5,600
Per Minute of Downtime
Average enterprise cost of a network outage per minute — making pre-deployment validation the most cost-effective investment.
Source: Industry Networking Data, 2024
85%
Complained Before Churning
85% of US customers who left their ISP had contacted support first. Poor Wi-Fi performance is the #1 driver of broadband churn — not price.
Source: Airties / Qualtrics Survey, 2025
61%
Endured 3+ Months of Problems
61% of US broadband customers who eventually churned suffered Wi-Fi issues for 3 or more months before switching. Silent frustration drives revenue loss.
Source: Airties / Qualtrics Survey, 2025
4.1B
Wi-Fi Devices Shipped in 2024
4.1 billion new Wi-Fi devices entered the market in 2024 alone. Every unvalidated device is a potential support ticket, a recall, or a lost customer.
Source: Wi-Fi Alliance / IDC, 2024
77%
of Smartphone Screen Time Is on Wi-Fi
Even away from home, 77–88% of US smartphone screen-on time occurs over Wi-Fi, not cellular — making gateway and router quality mission-critical for every mobile experience.
Source: Opensignal, 2024
$80B
Wi-Fi Market by 2034
The global Wi-Fi market, valued at $40B in 2024, is projected to double to $80B by 2034. Wi-Fi 7 adoption is accelerating 3× faster than prior generations — raising the validation stakes for every new device.
Source: Wi-Fi Alliance / Market Analysis, 2024
61%
of Enterprise Traffic Is Wireless
Wireless networks now carry 61% of total enterprise network traffic. As Wi-Fi becomes the primary enterprise transport layer, the cost of a performance gap — in field devices, gateways, or IoT — grows exponentially.
Source: WiFi Talents / Industry Data, 2024
Who We Are
INTELLIgent CUSTOMER ASSURANCE
Intellica transforms the way connectivity is validated — from consumer IoT devices to enterprise-grade ISP gateways, FWA routers, and mobile endpoints. We partner with device manufacturers, carriers, and ISPs to certify wireless performance before any product reaches end users.
Our 5 distributed test environments across the Pacific Northwest span real residential homes, office spaces, and a dedicated industrial lab — all instrumented with Intellica's proprietary monitoring platform delivering 1000+ metrics at 5-second intervals with full historical archiving.
📶
Wi-Fi Performance
Throughput, stability, coverage measured under controlled load: 200+ heterogeneous clients, configurable cycles and duration.
🔒
IoT & Device Testing
Any connected device: IoT sensors, smart home, ISP gateways, FWA routers, mobile endpoints, enterprise APs, and custom hardware.
⚙️
Customer-Specific Scenarios
API testing, USP/ACS protocol validation, custom container environments, proprietary process monitoring — any scenario defined by the customer.
📊
Data & Analytics
1000+ captured metrics: network, environment, process-level. Intellica dashboards, ETL pipelines, and automated alerts at 5-second intervals.
☁️
RDK-B Dev & Analysis
Full RDK-B development and test analysis. Container-based stacks, Webconfig, TR-069, MQTT, and firmware regression across all RDK-B releases.
📍
Site Survey & Deployment
Precision Wi-Fi surveys at Sammamish (4000+ sq ft, ~1000 points/radio) and on-location anywhere. Wireless installation advisory for any environment.
BBF TR-398 | Broadband Standard
The Gold Standard for Wi-Fi Performance
All testing adheres to Technical Report TR-398 from the Broadband Forum and applicable carrier specifications — ensuring every device meets certification thresholds before any customer interaction. Intellica supports heterogeneous client configurations up to 200+ simultaneous connections.
TR-398 Compliance Matrix
StandardBBF TR-398 Broadband
Wi-Fi StandardsWi-Fi 4 / 5 / 6 / 6E / 7
Frequency Bands2.4 / 5 / 6 GHz
Channel Widths20 / 40 / 80 / 160 MHz
Test Groups6 Groups — All Covered
Max Connection Test200+ Heterogeneous Clients
Traffic ProtocolTCP / UDP — iPerf3
Long-Term SupportEndless Duration — Customer Env
Live Test Progress — Current Cycle
G1
Spatial Consistency
Throughput uniformity at multiple antenna orientations and spatial locations. DUT tested with fixed 5 dB attenuation steps; variance thresholds per carrier spec.
G2
Peak Performance
Maximum achievable throughput under optimal RF conditions. Validates 802.11ax/be peak performance, dual-band concurrent throughput, and bidirectional UL/DL aggregate rates.
G3
Idle State Robustness
Validates recovery after idle periods. All clients reassociate on configurable cycle schedules — repeated for any customer-defined number of iterations or run indefinitely.
G4
Airtime Fairness
Heterogeneous client tests mixing AX, AC, N, BE (802.11ax/ac/n/be). Validates equitable scheduling across all generations. 200+ client configurations supported.
G5
Dual-Band Load Balancing
Simultaneous 2.4 GHz, 5 GHz, and 6 GHz loading with ACS validation. Measures band steering efficiency under TCP maximum load with interferer active on DUT-selected channel.
G6
AP Coexistence & Interference
Interferer generates congestion on DUT-selected channel. Bluetooth, adjacent-channel, and OBSS interference scenarios. Long-Term Stability and MTBF included.
Pacific Northwest Lab Network
5 Real-World Test Environments
Intellica's test environments span real residential homes, townhouses, offices, and a dedicated industrial-grade lab — covering all American property types across rural, suburban, and downtown locations. Authentic signal conditions, multi-floor propagation, and true consumer-grade validation.
📶
All American Property Types
Single-family homes, townhouses, offices — rural, suburban, and downtown locations
🏙
Historical Real-Time Data
All test data time-stamped, archived, and queryable — historical trend analysis and firmware regression
⚡
UPS-Protected Infrastructure
Uninterruptible power on all servers, DUT gear, and networking — enabling endless long-term testing
STL
Wi-Fi Performance
Sammamish Test Lab
📍 Sammamish, WA 98074
Primary performance validation lab. Features a dedicated Faraday Room for fully isolated RF testing, enabling controlled coexistence and interference scenarios without external signal leakage. Signal strength, stability, spectrum analysis, 200+ real client capacity — 49 active Wi-Fi clients across AX, AC, N.
Dedicated to long-duration stability — running endless open-ended tests in fully customer-defined environments. 3-floor instrumented house with heterogeneous client load and IoT layer: 4K streaming, smart plugs, and cameras running concurrently. No fixed duration — run as long as you need.
UptimeMemory LeakMTBFEndless DurationIoT Layer
RTL
Performance + J/L/P
Redmond Test Lab
📍 Redmond, WA 98053
Advanced jitter, latency, and packet loss testing alongside full throughput. Supports Wi-Fi 5, 6, 6E, and 7 client generations tested independently per band. Dynamic Channel Selection and band steering validation under full heterogeneous client load.
J/L/PWi-Fi 7Dynamic Ch.Band Steering
KTL
IoT + End-to-End
Kent Test Lab
📍 Kent, WA 98030
End-to-End, IoT ecosystem, and SSID testing. Custom Intellica scripts collect device data model parameters via gateway API. Smart camera, Alexa, smart plugs, thermostat, and color bulbs connected to DUT simultaneously for full interoperability validation.
IoT EcosystemSSIDAPI TestingData Model
BTL
Office / Industrial
Bellevue Tech Lab
📍 Bellevue, WA 98005
Dedicated office environment replicating real enterprise and industrial deployment scenarios. Multi-AP configurations, high-density client loads, enterprise protocol testing (API/USP/ACS), RDK-B development analysis, and industrial-grade long-term test campaigns.
Intellica's Sammamish lab houses our primary survey environment — 4000+ sq ft with approximately 1000 measurement points per radio for maximum accuracy. For customer site surveys, we can conduct a survey of any size at any location, adapting coverage density to the environment and requirements.
Sammamish Lab Floor Plan — ~1000 Distributed Test Points
FLOOR 1 — LIVING / KITCHEN / GARAGE
Living Room
Kitchen
Garage
Dining
DUT
FLOOR 2 — BEDROOMS / OFFICE / BATH
Master Bed
Bedroom 2
Home Office
Bedroom 3
Bath
AP2
FLOOR 3 — BONUS ROOM / ATTIC SPACE
Bonus Room
Media Room
Storage / Attic Access
AP3
~1000
Points / Radio
4000+
Sq Ft at STL
3
Bands Tested
MEASUREMENT INSTRUMENTS
Intellica Site Survey TooliPerf3 — ThroughputNetwork Info II — RSSISpectrum Analyzer
📍 On-Location Survey Available
Need a survey at your own facility? We conduct site surveys anywhere — any size, any environment. Contact us with your location details for a custom quote.
Intellica provides professional network wireless installation advice for any location type. Our survey data pinpoints coverage gaps, recommends AP placement, and validates signal performance before and after deployment — for any environment.
Survey Protocol
Test points are systematically distributed to cover the full environment floor plan. Density is configured per environment size and accuracy requirements. Each point captures throughput and RSSI under multiple interference scenarios, independently per frequency band.
4 Interference Scenarios
S1
Baseline — No Interference
Clean RF environment. Establishes peak reference values for throughput and RSSI at all test points.
S2
Bluetooth Interference
Active Bluetooth peripherals in the 2.4 GHz band. Measures coexistence between Bluetooth and Wi-Fi 4/5/6 on shared channels.
S3
Audio/Video Teleconference
Real-world AV conferencing traffic — concurrent UDP audio/video streams at all test points across all bands.
S4
High-Resolution Video Streaming
Sustained 4K streaming load via high-bitrate TCP. Evaluates buffer management and spatial consistency under real consumer streaming conditions.
Frequency Band Coverage
2.4G
Wi-Fi 4/5/6
5 GHz
Wi-Fi 5/6
6 GHz
Wi-Fi 6E
~1000
Points / Radio at STL
Any
Size On-Location
4
Interference Scenarios
3
Frequency Bands
Extended: UX Out-of-Box Testing
Customer Experience Validation
Beyond RF performance, Intellica validates the full out-of-box experience from unboxing and app setup through multi-band connectivity and gateway management UI. Testing covers SMS, MMS, and Voice Calls over Wi-Fi on both Android and iOS across multiple carrier markets.
The Moving Client test uses a LiDAR-equipped robotic platform to expose signal dead zones, weak handovers, and band steering gaps as the client traverses the test environment.
UX Test Categories
Installation & Setup
Coverage & Range
5G Speed & Latency
Guest Network Setup
Multi-Device & Mobile
Reboot & Reset UX
LED Status Indicators
SMS / MMS / VoIP over Wi-Fi
Customer-Specific Programs
Any Scenario. Any Device. Any Duration.
Intellica designs and executes fully custom test programs — whether you need protocol-level API validation, endless long-term stability campaigns, or deep RDK-B development analysis. If you can define the scenario, we can run it.
🔗
API / USP / ACS Testing
Full protocol-level validation for TR-069 ACS, USP (TR-369), and proprietary API interfaces. Custom Intellica scripts collect and validate data model parameters, firmware upgrade flows, configuration management, and session handling — against any server environment the customer defines.
🕐
Long-Term Endless Testing
No fixed duration. Intellica's infrastructure supports open-ended stability runs in fully customer-defined environments — specific container stacks, processes, network topology, and load profiles. UPS-protected hardware ensures uninterrupted operation for days, weeks, or months.
⚙️
RDK-B Dev & Analysis
Intellica supports RDK-B teams with development validation and test analysis across firmware releases. Container-based test execution, Webconfig validation, MQTT broker testing, TR-069/USP coexistence, and process-level behavioral analysis across all RDK-B stack layers.
📱
Mobile & Multi-Platform
End-to-end mobile testing: Android and iOS, multiple carriers, indoor and outdoor coverage. SMS, MMS, VoIP over Wi-Fi, handoff behavior, and app-layer performance — combined with gateway testing for complete wireless ecosystem validation.
🔌
IoT Ecosystem Validation
Any IoT device — smart plugs, industrial sensors, cameras, voice assistants, thermostats, custom hardware. Onboarding flows, concurrent device behavior, coexistence under Wi-Fi load, and real-world interoperability in live consumer environments.
📊
Custom Scenarios & Containers
Run any scenario with your specific container stack or process configuration. Intellica captures 1000+ metrics — network, environment, and process-level — so every data point required during your test is captured and archived for full analysis.
Test Deliverables
1000+ Metrics. Complete Visibility.
Intellica's monitoring platform captures over 1000 metrics spanning network performance, device environment, and process-level behavior — at 5-second intervals with full historical archiving. If it can be measured, we measure it.
📈
Throughput
Client-based and aggregated TCP/UDP throughput. 200+ simultaneous heterogeneous clients across AX, AC, N, BE. Per-client and aggregate views across all test cycles.
⏱️
Jitter, Latency & Packet Loss
Ping-based J/L/P per Wi-Fi band. Dedicated client pings local Ethernet server — repeated independently for each band and client generation (Wi-Fi 5, 6, 7).
📡
Signal Strength (RSSI)
Received signal power per connected client. Band, channel, and interface tracked continuously. Roaming event correlation via interface change count per cycle.
🔗
Connection Stability
Association and disassociation events tracked on configurable schedules. Failures trigger Intellica alert notifications immediately.
💻
CPU Utilization
Per-core CPU usage via Intellica's monitoring agent. Process-level resource consumption tracked per service with configurable alert thresholds.
🧠
Memory & Storage
RAM utilization and file system usage across all test phases. Memory leak detection via long-term trend analysis against stability run baseline.
🌡️
Environment & Temperature
Operating temperature, thermal management, ambient environment metrics. Overheating events correlated with throughput degradation and CPU spikes.
📻
Process & Custom Metrics
Any process, container, or application-layer metric defined by the customer. 1000+ total data points — network, environment, process-level — fully queryable via Intellica's API.
Tested Device Portfolio
Any Device. Any Vendor.
Intellica has tested devices from leading global vendors across FWA, ISP gateway, IoT, Wi-Fi mesh, and enterprise categories. We work with customer requests, comparison testing, and competitive benchmarking — no limitation on device type or vendor.
NOK
Nokia
5G21 / Gateways
FWA / ISP
SGC
Sagemcom
Fast 5688W +
FWA / ISP
ARC
Arcadyan
KVD21 / G4AR
FWA / ISP
SRC
Sercomm
TMO-4GSE +
FWA / 4G
NTG
Netgear
Orbi / Nighthawk
Wi-Fi Mesh
ASK
Askey
RTF3505VW +
FWA / ISP
VZW
Verizon
FWA Devices
FWA
ATT
AT&T
FWA / BGW
FWA / ISP
XFN
Comcast
Xfinity Gateway
ISP
ERO
Amazon
Eero Series
Wi-Fi Mesh
GGL
Google
Nest Wi-Fi
Wi-Fi Mesh
+
Your Device
Any vendor, any form factor
On Request
Flexible Deployment Scenarios
We run any scenario with your specific container stack or process environment. Rather than prescribing scenarios, Intellica instruments whatever environment you define and captures every metric that matters.
Data Architecture
Intellica Monitoring & Data Pipeline
Every DUT metric is captured by Intellica's monitoring agents every 5 seconds. Unique time-series keys per timestamp, device instance, metric, and interface. Custom dashboards and automated alert system — all built and maintained by Intellica.
01
🖥️
Device Under Test (DUT)
Any device type in customer-defined configuration. Factory reset, firmware and container verification. Connected to client pool and interferer setup as required by the test plan.
02
📤
Intellica Monitoring Agents
Lightweight agents collect CPU, RAM, disk, network interfaces, and per-process resource metrics. Deployed on DUT and all load, management, and support servers.
03
🔄
Data Collection — 5s Intervals
Intellica scripts poll each agent's metrics endpoint every 5 seconds. 1000+ unique time-series keys per test instance. JSON export via Intellica's query API for report generation.
04
💾
Time-Series Storage + Compaction
Intellica's time-series database with block compression, compaction, and configurable retention. Optimized for append-heavy operations with fast range queries across any time window.
05
📊
Intellica Dashboard + Alert System
Custom dashboards for all 1000+ metrics. Alert engine fires email notification on DUT failure, low throughput, or any customer-defined threshold breach.
Intellica Toolset
iPerf3
Industry-standard throughput tool. TCP/UDP UL/DL at configurable bitrates. 200+ simultaneous clients for heterogeneous aggregate load testing.
Site Survey Tool
Intellica's survey platform. ~1000 points per radio at Sammamish (4000+ sq ft). Any size survey available on-location.
Monitoring Dashboard
Real-time visualization of all 1000+ metrics. Aggregated throughput, per-client RSSI, CPU/RAM, channel utilization, J/L/P over any time range.
Alert System
Rule-based alert engine. Fires email to configured recipients when any DUT failure, throughput drop, or anomaly condition triggers.
Automation Manager
Orchestrates multi-DUT parallel testing. All parameters fully configurable — device count, loop count, load type, band control, client assignments.
Spectrum Analyzer
RF spectrum visualization for interference detection and coexistence testing. Available at STL Sammamish Faraday Room.
Automation — Fully Configurable
Test Duration
Fully configurable — any loop count, any time period. Open-ended endless mode for customer-defined long-term campaigns. No fixed limit.
Load Type & Period
TCP/UDP Uplink & Downlink. Load duration, reassociation timing, and load profile are all customer-defined per test plan.
Client Scale
Up to 200+ heterogeneous clients — Wi-Fi 4/5/6/6E/7. Any mix of generations for airtime fairness and load characterization.
DUT Config
Multi-DUT parallel testing. Customer-defined container stacks, process configurations, and firmware versions per instance.
Band Control
Per-band client assignment. 2.4 GHz, 5 GHz, and 6 GHz tested independently or simultaneously, as the test plan requires.
Metrics Captured
1000+ metrics — network, environment, process-level. Any data point required during the test is captured and archived with timestamps.
Methodology
5-Stage Validated Testing Process
01
Test Planning & Scope Definition
Define in-scope and out-of-scope test cases per device and firmware version. Identify required test groups, carrier or customer-specific requirements, and container/process scenarios. Allocate resources, lab assignments, and timeline per device model.
02
Environment Setup
Factory reset DUT before each test. Verify firmware and container versions. Confirm all Intellica monitoring agents are active and collecting at 5s intervals. Configure automation with DUT info, client assignments, band control, and all customer-defined parameters.
03
Test Execution
Monitor throughput and stability under full client load. Track 1000+ metrics: CPU, memory, temperature, J/L/P, RSSI, and all process-level data continuously. Validate functional features — ACS, band steering, roaming, API behavior — while load is active. Long-term runs continue uninterrupted for any customer-defined duration.
04
Analysis & Report Generation
Correlate data across Intellica's time-series database. Evaluate performance metrics, identify anomalies, and characterize device health patterns. Generate comprehensive reports with pass/fail matrices, raw data exports, historical comparisons, and actionable recommendations.
05
Feedback Loop & Regression
Tiered troubleshooting: Tier 1 (reboot/factory reset/alternate unit), Tier 2 (log and process analysis), Tier 3 (congestion testing, band separation, protocol change, container isolation). Regression confirms fixes don't introduce new failures before sign-off.
Security & Vulnerability
Wireless Security Testing
Beyond performance, Intellica validates the security posture of wireless devices — ensuring gateways, routers, and IoT endpoints are hardened against real-world attack vectors before they reach customers.
🔒
Authentication & Access
Default credential checks, admin panel exposure, brute-force resilience, and unauthorized access path validation across all management interfaces.
🌎
Network Isolation
Guest network segregation, VLAN boundary testing, inter-SSID traffic leakage, and client isolation bypass validation in multi-tenant configurations.
⚙️
Firmware & OTA
Firmware integrity validation, OTA update security, rollback attack resistance, and unsigned image rejection testing across update channels.
📶
RF & Protocol
WPA2/WPA3 configuration validation, rogue AP detection resilience, deauthentication flood behavior, and management frame protection verification.
⚠️
Security testing scope is defined per engagement in coordination with the customer. Intellica performs targeted validation against customer-specified threat models — not open-ended penetration testing. Contact us to define scope.
Whether you need TR-398 certification, a precision site survey, long-term stability testing, custom API/USP/ACS validation, or a complete wireless testing program for any device — our team is ready to define the scope and deliver results.